Mac Os X Users; Installing The Driver - Roland EDIROL UA-1EX Bedienungsanleitung

Mac OS X Users

Steps to be performed on the UA-1EX itself are marked by a

Installing the driver

* If the "Authenticate" dialog box appears during the installation, input the password and click "OK."
* What you actually see on your computer screen may be different, depending on your computing environment
and the operating system you're using.
1. With the UA-1EX disconnected, start up the Macintosh.
* Disconnect all USB cables except for a USB keyboard and USB mouse (if used).
2. Exit all currently running software (applications).
If you are using virus checking or similar software, be sure to exit it as well.
3. Prepare the CD-ROM.
Insert the CD-ROM into the CD-ROM drive of your Macintosh.
4. In the Driver (Mac OS X) folder of the CD-ROM, double-click UA1EXUSBDriver.pkg.
* A message such as "This Installer package needs to..." may appear.
Click "Continue."
5. The display will indicate "Welcome to the EDIROL UA-1EX Driver Installer."
Click [Continue].
6. The display will indicate "Select a Destination."
Click the drive in which the operating system is installed to select it, and then click [Continue].
* Select your startup disk as the drive.
7. The display will indicate "Easy Install."
Click [Install] or [Upgrade].
8. The display will indicate "Installing this software requires you to restart your computer when
the installation is done."
Click [Continue Installation].
9. The display will indicate "The software was successfully installed."
Click [Restart] to restart your computer.
This completes installation of the UA-1EX driver.
Next, make audio device settings. (
28
→
"Input/output device settings" (p. 29))
symbol.
Operation of the UA-1EX