Autostart - Sage Precision Brewer BDC400 Kurzanleitung

NOTE
DO NOT fill the water tank above the SINGLE
CUP marking or the volume of the cup being used.
Otherwise it will overflow, as the machine brews
until the water tank is empty.
2. Place your empty cup underneath the brew
basket outlet.
3. We recommend using cone filter basket insert
for single cups.
4. Insert the Cone filter basket into the brew
basket. Use the alignment marks as a guide.
5. Place a cone shaped paper filter into the cone
filter basket.
6. Grind the correct amount of whole bean coffee
for the amount being brewed.
7. Select desired brewing mode.
8. Press START / CANCEL to begin brewing.
AUTO START
Allows you to automatically start brewing
at preset time.
1. Set filter basket type for the amount
of coffee being brewed.
2. Select your brewing mode.
3. Fill the water tank with enough fresh cold water
for the amount of coffee being brewed.
4. Insert the brew basket with your desired insert
or paper filter and add ground coffee.
5. Insert the appropriate cup or the carafe with
the lid locked in place into the machine.
6. Press the AUTO START button.
FAST CUSTOMIZE
GOLD
BLOOM TIME
STRONG
BLOOM VOL.
MYBREW
BREW TEMP.
POUROVER FLOW RATE
COLD BREW
REMOVE
SETTINGS
CARAFE LID
SET CLOCK STANDBY
KEEP WARM
DESCALE
FILL
SOUND EXIT
TANK!
TIME SINCE BREW
AUTO START AT
MIN MAX
HEATING BLOOMINGBREWING
AM
PM
HR
7. The machine will prompt you to set the time
for Auto Start. Rotate the SELECT dial to adjust
Auto Start time, press SELECT dial to set.
Auto Start is now set and the machine will
enter Auto Start mode, brewing automatically
at the set Auto Start time.
NOTE
If the clock hasn't been set, the machine will
prompt you to set the clock. Ensure the clock is
correct. The clock will reset every time the unit is
unplugged.
FAST CUSTOMIZE
GOLD
BLOOM TIME
STRONG
BLOOM VOL.
MYBREW
BREW TEMP.
POUROVER
FLOW RATE
COLD BREW
REMOVE
SETTINGS
CARAFE LID
SET CLOCK STANDBY
DESCALE KEEP WARM
FILL
SOUND EXIT
TANK!
TIME SINCE BREW
AUTO START AT
MIN MAX
HEATING BLOOMINGBREWING
AM
PM
HR
8. Pressing START / CANCEL will cancel the set
AUTO START time.
SETTINGS
• SET CLOCK: Set the time displayed on LCD.
• DESCALE: Clear mineral build up on internal
components.
• SOUND: Sound volume is adjustable and also
can be turned off.
• STANDBY: Adjust time to automatically enter
STANDBY mode after a period of no use.
• NEW FILTER: Update when a new filter is
installed in the machine.
CHILD-LOCK
To prevent children from possible danger,
child‑lock feature is available. Press and hold
AUTO START for 3 seconds. LCD
will display "CL" when it is locked. Repeat this
again or unplug the unit to unlock.
DEGREE INDICATION PREFERENCE
To switch between C° / F°, press the SELECT dial
and AUTO START button at the same time. Rotate
the SELECT dial to set preference.
EN
11