Care & Cleaning - Sage Precision Brewer BDC400 Kurzanleitung

KEEP WARM
* Applicable to the Sage
Glass (SDC400) only.
FAST CUSTOMIZE
GOLD
BLOOM TIME
STRONG
BLOOM VOL.
MYBREW
BREW TEMP.
POUROVER
FLOW RATE
COLD BREW
REMOVE
SETTINGS
CARAFE LID
SET CLOCK STANDBY
DESCALE KEEP WARM
FILL
SOUND EXIT
TANK!
TIME SINCE BREW NEW FILTER
AUTO START AT
MIN MAX
HEATING BLOOMINGBREWING
AM
PM
HR
KEEP WARM will be activated automatically for
brew volumes above 450 mls.
• KEEP WARM can be switched off by navigating
the SETTINGS menu to KEEP WARM then
rotate and press SELECT dial to set ON or OFF.
• Keep warm will not engage on cold brew mode
or pour over mode.
CAUTION
The bottom of the carafe is hot to touch for several
minutes after brewing. Use caution and ensure not
to set the carafe on a heat sensitive surface.
CAUTION
Do not place the thermal carafe on the heater plate
when KEEP WARM is activated. It will damage the
insulation.
WARNING
Do not place pour over kit / box on heater plate
when hot.
12
Precision Brewer
® ™
Care &
Cleaning
Always turn the coffee machine off and remove the
plug from the power outlet before cleaning.
CLEANING THE COFFEE BASKET
AND MESH BASKET FILTER
Remove the coffee basket. Discard any ground
coffee and filter paper. The coffee basket and
mesh basket filter can be rinsed under running
water. Ensure the fine holes of the mesh basket
filter are clear. For a deeper clean, wash the coffee
basket and mesh basket filter in warm, soapy water
with a soft bristled brush.
CAUTION
The coffee basket, mesh basket or paper filter
may still be very hot after brewing. Use caution and
allow to cool before removing.
CLEANING THE CARAFE
After each use, empty the carafe. Do not let brewed
coffee stand overnight as this can cause the carafe
to stain. Rinse the carafe and carafe lid under warm
running water. For a deeper clean, we recommend
regularly washing the carafe in warm, soapy water
using a soft bristled brush. Do not use abrasive
cleansers, pads or cloths which can scratch the
surface. Rinse and dry thoroughly.
CLEANING THE SHOWERHEAD
Simply wipe down the showerhead area
periodically. However, if a more thorough clean
is required, the Showerhead can be removed by
unlocking the Showerhead Ring. Rotate clockwise
then remove the Showerhead for cleaning. Once
complete, reinstall the Showerhead.
CLEANING THE OUTER HOUSING
The outer housing and LCD screen can be
cleaned with a soft, damp cloth. Apply cleaner to
the cloth and not the LCD surface. Polish with a
soft, dry cloth. Cleaning and drying with dry paper
towels or abrasive cloths and cleaners may scratch
the surface.
REPLACING THE WATER FILTER
The provided water filter helps prevent scale
build‑up in and on many of the inner functioning
components. Replacing the water filter when
indicated on the screen or after 3 months will
reduce the need to descale.