Technical Data; Special Safety Instructions - Power Craft 62000 Gebrauchsanweisung

ROTARY SANDER
Instruction manual
Read the instruction manual
carefully before use, and keep it for
future reference.
Voltage/frequency
Indicates the required voltage and
frequency of the power supply to
which the machine is connected.
Power rating
GB
Indicates the machine's maximum
power.
Introduction
To get the most out of your new rotary
sander, please read this manual and the
enclosed safety instructions before use.
Please also save the manual in case you
need to refer to it at a later date.

Technical data

Voltage/frequency:
Power rating:
Disc diameter:
Eccentric rotations:
Noise:
Vibrations:
18
230 V ~ 50 Hz
300 W
125 mm
12,000 per min
LpA:81 dB(A), Kpa: 3 dB(A)
LwA:92 dB(A), Kpa: 3 dB(A)
Ah: 4,89m/s
K:1,5m/s
Speed
Indicates the machine's speed(s)
or speed range in revolutions per
minute.
Disc size
Gives the diameter of the disc.

Special safety instructions

Never use a disc unsuitable for the task and
item.
Not suitable for wet sanding.
Never allow disc to be in contact with item
to be worked - or other objects - when
starting.
Keep � ngers away from the working area
whilst the sander is running.
Keep cable well clear of working area.
Always use a face mask if excessive amounts
of dust are generated or sanding harmful
materials.
Always wear safety glasses, especially when
working at eye height.
Do not lie the sander on its side before it
2
has completely stopped.
2