Sony UP-20 Gebrauchsanweisung Seite 50

Menu When you
Adjustment want to
item
MAG-GRN Make the
image
greenish.
Make the
image
magenta
(pink).
YEL-BLU Make the
image
bluish.
Make the
image
yellowish.
To adjust the contrast (DARK/LIGHT)
The contrast settings are divided into 15 steps, from
–7 to +7, indicated by a value and graph. The center
of the graph (0) corresponds to the standard setting.
Adjustment item
DARK
LIGHT
To adjust the sharpness (SHARPNESS/
INTERPOL.)
SHARPNESS:
You can set the sharpness to any of 15 steps from 1
to 15. A setting of step 8 corresponds to the
standard sharpness (default setting).
When you want to Content of settings
Make a soft outline.
Make a normal
outline.
Make a sharp outline. To the right (toward step 15)
INTERPOL. (Interpolation):
You can select either ON or OFF depending on the
type of image.
When you want to
Print out image data such as a figure
image or a landscape.
Print out image data of computer graphics
or of an image with small letters.
Note
The effectiveness of SHARPNESS may differ
between ON and OFF settings of INTERPOL.
50
Adjusting the Color and Picture Quality
Button to Adjustment
be direction on
pressed the menu
g button
Toward GRN
(green)
G button
Toward MAG
(magenta)
g button Toward BLU
(blue)
G button Toward YEL
(yellow)
When you want to
Adjust the dark area of an image.
Adjust the light area of an image.
To the left (toward step 1)
Centered (step 8)
Setting
ON
OFF
Once you have changed the value
Once you have changed the value, TEMP
(TEMPORARY) appears on the menu screen.
TEMP indicates that the settings are temporary and
have not yet been stored. If you turn off the power
of the printer while TEMP is displayed, the
adjusted values are not stored.
4
Select the SAVE COLOR number to which new
settings are to be stored using the SAVE COLOR
item.
To retain the originally set value
Select a SAVE COLOR number which is different
from the LOAD COLOR number selected in step 2.
5
Press the EXEC button.
The settings are registered in the SAVE COLOR
number selected in step 4.
TEMP disappears from the menu.
To continue settings for another LOAD COLOR
number: Repeat steps 2 to 5.
To finish the setting: Press the MENU button.
The regular screen appears.
To copy the settings made for one LOAD
COLOR number to another LOAD COLOR
number
1
Select the source LOAD COLOR number for which
the settings to be copied are stored on the COLOR
ADJUST menu.
2
Select the target SAVE COLOR number to which
data is to be copied.
3
Press the EXEC button.
Settings stored for the LOAD COLOR number
selected in step 1 are copied to the SAVE COLOR
number selected in step 2.
To recall the LOAD COLOR number in which
printout color settings (color intensity, contrast
and sharpness) are stored
Switch the desired LOAD COLOR number to green on
the COLOR ADJUST menu. On the printer window
display, display the desired LOAD COLOR number.
The settings of the currently selected LOAD COLOR
number are displayed.
The printout is made according to the setting of the
selected LOAD COLOR number as long as you do not
modify those settings.