When A Black Frame Or Lines Show Up On The Printouts - Sony UP-20 Gebrauchsanweisung

Adjusting the tone of the printout
You can adjust the tone so that the details in the white or
black part are clearly printed.
1
Display the PRINTER SETUP menu.
PRINTER SETUP menu
2
Select GAMMA, and then the desired tone.
The selected tone is spelled out.
When you want to
Make a printout of an image where
there are a lot of white or light-
colored areas.
Make a printout of a normal image.
Make a printout of an image where
there are a lot of black or dark-
colored areas.
When a Black Frame or Lines Show
up on the Printouts
When you print an image that is narrower or wider than
the standard screen size, a black frame may be printed or
the image may be partially cut. Or, a black line may
show up on the printout even though it does not appear
on the video monitor. Any portion for which there is no
video signal is printed in black. This may occur when
you make printouts after connecting a different video
source or play back using different video software. In
such a case, you can adjust the printout area by moving
the screen either horizontally or vertically.
Note
This adjustment affects only the input signal. This
adjustment does not affect the image captured in the
memory.
1
Display the WINDOW SETUP menu from the
LAYOUT SETUP menu.
Note
When the WINDOW SETUP menu appears, the
images stored in the memory will be cleared.
2
Setting
S t SOFT
N t NORMAL
H t HARD
Perform adjustments according to the printout
obtained by using the V START, V WIDTH, H
START and H WIDTH items.
Item to be used for eliminating the vertical
line at the right side
Item to be used for eliminating the horizontal line on
the bottom
Item to be used for eliminating the vertical
line at the left side
Item to be used for eliminating the horizontal line at
the top
When a horizontal black line is produced on
the printout
To eliminate a horizontal black line produced at
the top:
Adjust the top position of the image to be printed
using the V START item.
Note
It is alright if a black line appears at the bottom
while you adjusting the top. You can eliminate it
using the V WIDTH item.
Adjusting the Color and Picture Quality
51