RECARO C 6000 Einbauanleitung Seite 51

Warning!
Ensure that you neither exceed nor fall short of the torque listed above.
If the torque is insufficient, the screws will work loose whilst you are driving. The thread might be
damaged if the torque is too high. There is a risk of an accident and injury whilst driving in both
cases.
The vehicle must be stopped immediately if a screw works loose and the screws must be replaced
by new screws and tightened to the stipulated torque with the screw locking device.
R
3
4. Attach the footwell ventilation hose (2) to the ventilation grille holder and then pull the hose clamp (1)
back on.
5. Fit the ventilation grille (3) of the footwell ventilation.
S
6. Secure the control unit (1).
7. Tightly screw the control unit connection bush in place with the two original screws (3).
8. Screw the control unit plug (2) onto the connection bush.
RECARO Automotive Seating
1 Hose clamp screw
2 Ventilation hose
3 Ventilation grille
1 Control unit
2 Control unit plug
3 Connecting bush screws
Page 20