Faults and how to remedy
Problem
Tilt switch is not
working.
String breaks too
frequently
When in doubt, always consult a WOLF service workshop.
1Switch off the trimmer and disconnect the battery before inspecting, cleaning or
working on the thread.
Spare parts
Ordering Number
7117 081
7130 102
7420 096
7420 061
Supplied by your dealer.
16
Possible cause
• Spool is empty.
• Dirt and debris in spool drive
mechanism.
• Line is torn and stuck inside
spool.
• Line is „welded" to itself or to
spool through heat build-up.
• Coil too dry or brittle.
• String in contact with fence
posts, trees, etc.
Designation of the item
RQ-FA
LI-ION POWER Pack 3
Remedy
Fit new spool.
Clean parts with a brush.
Remove spool, check tightness of
winding and replace spool in the
usual way.
Remove welded line section, check
tightness of winding and replace
spool in the usual way.
Place the coil in a container with
water for approx. 24 hours. Dry
and reinstall it.
Use plant guard.
Description of the item
Cord spool
Plant hoop guard
Battery
Charger (standard)