Faults And How To Remedy; Spare Parts - Wolf Garten GT 840 Gebrauchsanweisung

Faults and how to remedy

Problem
utomatic line feed
mechanism is not
working.
When in doubt, always consult a WOLF service workshop.

Spare parts

Ordering Number
7130 085
7136 086
7136 102
Supplied by your dealer
16
Possible cause
• Spool is empty.
• Dirt and debris in spool drive
mechanism.
• Line is torn and stuck inside
spool.
• Line is „welded" to itself or to
spool through heat build-up.
Designation of the item
GT-F7
GT-R
Remedy
Fit new spool.
Clean parts with a brush.
Remove spool, check tightness of
winding and replace spool in the
usual way.
Remove welded line section,
check tightness of winding and
replace spool in the usual way.
Description of the item
Cord spool
Wheels (only GT 840)
Plant hoop guard