Key Menu - Coffee Selection; Key Menu - Cappuccino Selection - La Cimbali S39 Dolcevita 2 Gebrauch Und Installation

Exiting the programming menu
Machines WITH the OK key
there are two possibilities:
1) Press the OK
2) Press the RES (24) key to leave settings unchanged
and exit the menu
If the "Customer Progr." is set to "NO", the following
message will appear on the display:
Press one of the coffee dispensing keys (32) (the relative
led will remain on). The following message will appear on
the display:
KEY MENU
Type
repetition
Water dose
MM1 cof, dose
MM2 cof, dose
(it represents the number of distributions of
the selected drink, from 001 to 099);
(volumetric dosage pulses, from 0 to 1999,
with increments of 1);
... (coffee dose grinde ...impulses, 0 ÷ 200
with increments of 1);
(volumetric dosage pulses, from 0 to 1999,
with increments of 1);
the color of the LEDs during dispensing,
000 - 015).
Press one of the cappuccino dispensing keys (32) (the
relative led will remain on). The following message will
appear on the display:
KEY MENU
Type
repetition
Milk dose
Emulsion
Cold milk dose
The following cappuccino selection parameters can be
(it represents the number of distributions of
the selected drink, from 001 to 099);
(milk dispensing time: 0 ÷ 60 seconds, with
increments of 0.1);
((foamed milk dispensing time, from 0 to 60,
with increments of 0.1 seconds);
(cold milk dose; from 0 to 20 with increments
02_S39DV2.indd 23

19.1 Key menu - Coffee selection

The components - * - are applied only in some produit
The dose for making a cup of coffee can be composed of
grounds taken from both hoppers, which has the advantage
+
1 coffee of less time needed for grinding.
001
110
10 of the value set in the technical programming menu.
043
Example
000
technical programming
coffee dose MM1 045
coffee dose MM2 020

19.2 Key menu - Cappuccino selection

+
1 cappuccino
with increments of 1);
001
04.0
03.0 000 - 015).
05.0
The components - * - are applied only in some produit
The dose for making a cup of coffee can be composed of
grounds taken from both hoppers, which has the advantage
of less time needed for grinding.
10 of the value set in the technical programming menu.
23 EN
CUSTOMER PROG.
NOT ENABLED!
customer programming
coffee dose MM1 035÷055
coffee dose MM2 010÷030
of 0.1 seconds);
(volumetric dosage pulses, from 0 to 1999,
with increments of 1);
... (coffee dose grinde ...impulses, 0 ÷ 200
with increments of 1);
(volumetric dosage pulses, from 0 to 1999,
the color of the LEDs during dispensing,
+
+
18/06/2014 15:15:33