Installation Check-Up; Hot Water - La Cimbali S39 Dolcevita 2 Gebrauch Und Installation

WARNING: AFTER INSTALLATION, CHECK TO SEE IF THE MACHINE IS WORKING PROPERLY (see the
Installation Module C).
WATER CONNECTIONS
• No leaks from the connections or tubes
FUNCTIONING
• Boiler and operating pressures are normal.
• The pressure gauge is working properly.
• The self-leveling device is working properly.
• The expansion valves are working properly
WARNING: ONCE THE MACHINE HAS BEEN INSTALLED AND IS READY FOR USE, BEFORE ALLOWING
THE WORKER TO START USING THE MACHINE, WASH THE INTERNAL COMPONENTS ACCORDING
TO THE INSTRUCTIONS BELOW:
COFFEE CIRCUIT / MILK CIRCUIT
• Keep the coffee circuit wash key (26)

HOT WATER

• Continuously dispense hot water until at least 2 liters of water have been dispensed.
STEAM (also with Turbosteam)
• Dispense steam from the nozzles for about a minute, using the appropriate buttons.
02_S39DV2.indd 5

5. Installation Check-up

pressed for a few seconds.
5 EN
18/06/2014 15:15:26