Electrical Information; Identification Of Parts; Accessories - Midea PH-Serie Bedienungsanleitung

IDENTIFICATION OF PARTS

For your safety
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other
appliance.
Avoid fire hazard or electric shock. Do not use an extension cord or an adaptor plug. Do not remove
any prong from the power cord.

Electrical Information

WARNING
Be sure the electrical service is adequate for the model you have chosen. This information can be found
on the serial plate, which is located on the side of the cabinet and behind the grille.
Be sure the air conditioner is properly grounded. To minimize shock and fire hazards, proper grounding is
important. The power cord is equipped with a three-prong grounding plug for protection against shock
hazards.
Your air conditioner must be used in a properly grounded wall receptacle. If the wall receptacle you intend
to use is not adequately grounded or protected by a time delay fuse or circuit breaker, have a qualified
electrician install the proper receptacle.
Ensure the receptacle is accessible after the unit installation.

Accessories

PARTS :
or
NOTE: Optional parts(
Check all the accessories are included in the package and please refer to the installation instructions for
their usage.
All the illustrations in this manual are for explanation purpose only. Your air conditioner
NOTE:
may be slightly different. The actual shape shall prevail.
PARTS NAME :
Exhaust hose(supplied), adapter B(round
mouth or flat month:depending on models)
and Window Slider Kit and bolt ( )
Adaptor B(round mouth) ( )
Wall Exhaust Adaptor A(
Expansion Plug and wooden screw( )
Foam seal
Remote Controller and Battery
(For remote control models only)
Drain hose
), some models without.
4 4
)
( )
QUANTITY :
1 set
1 set
1 pc
4/ pc
3/pc
1set
1pc