Technical Data - Sartorius Mikro-Dismembrator U Bedienungsanleitung

Technical Data

Ordering information
8531722
8531730
8531609
Accessories
Shaking flasks and grinding balls or glass beads are required for the grinding process. We offer flasks with sizes of 3 ml, 5 ml, 7 ml
and 20 ml. Choose from grinding balls made of agate, steel or Tungsten carbide. Glass beads can only be used for wet or liquid
samples. Grinding balls have to be used for frozen or brittle material. The choice of suitable flasks and grinding balls depends on the
intended application but the following table provides a general guide.
Shaking flasks
Grinding balls
PTFE|steel core
Agate
Stainless steel
Tungsten carbide
= very suitable, = suitable
Technical data
Shaking amplitude:
Shaking frequency
Mikro-Dismembrator U:
Shaking frequency
Mikro-Dismembrator S:
Accuracy of frequency:
Drive:
Power consumption:
Setting the timer:
Setting the frequency:
Programmable timer:
Display:
Admissible temperature range:
Admissible humidity:
Power supply:
Dimensions (W + H+D):
Weight (net):
All units are delivered without shaking flasks and other accessories.
Mikro-Dismembrator U
Mikro-Dismembrator U
Mikro-Dismembrator S
Stainless steel
approx. 16 mm
-1
50 to 2.000 min
-1
50 to 3.000 min
+10%, –2%
brushless drive motor
120 W
membrane key pad
membrane key pad
To 98.59 min, continuous
LCD, alphanumeric
+10°C to + 60°C
10 to 90% non condensing
230 V/50 – 60 Hz
115 V/50 – 60 Hz
297 + 259+205 mm
19 kg
230 V/50–60 Hz
115 V/50–60 Hz
115 V/230 V/50–60 Hz convertible
PTFE