Yamaha WR400F Fahrer- Und Wartungshandbuch Seite 360

CLUTCH
5. Install:
Push rod 2 1
Push rod 1 2
NOTE:
Apply the engine oil on the push rod 1, 2.
6. Install:
Pressure plate 1
NOTE:
Align the much mark a on the pressure plate
with the punched mark b on the clutch boss.
7. Install:
Clutch spring
Bolt (clutch spring)
NOTE:
Tighten the bolts in stage, using a crisscross
pattern.
8. Install:
Gasket (clutch cover) 1
Dowel pin 2
9. Install:
Clutch cover 1
Bolt (clutch cover)
NOTE:
Tighten the bolts in stage, using a crisscross
pattern.
4 - 49
ENG
8 Nm (0.8 m · kg, 5.8 ft · lb)
New
10 Nm (1.0 m · kg, 7.2 ft · lb)