Electrical Connections - WIKA T32.1S Betriebsanleitung

9. Electrical connections

9. Electrical connections
WARNING!
Observe the safety-technical maximum values for the
connection of the power supply and the sensors, see
chapter "10.3 Safety-technical maximum values".
When working on the transmitters (e.g. installation/removal,
maintenance work) take measures to prevent electrostatic discharge
from the terminals.
WARNING!
Only carry out installation in a de-energised state!
The connected wires must be checked to ensure they are
connected properly. Only well-secured wires can guaran-
tee a fault-free operation.
Input
Sensor
Output
4 ... 20 mA loop
For head mounting and rail mounting case, connection clamps for the HART
available.
WIKA operating instructions temperature transmitter T32.xS
GB
modem are
®
29