Electrical Connections - WIKA T24.10 Betriebsanleitung

6. Commissioning, operation
Mounting in connection head
Insert the measuring insert with the mounted transmitter into the
protective sheath and secure into the connecting head using screws in
pressure springs.

6.2 Electrical connections

WARNING!
Observe the safety-related maximum values for the
connection of the power supply and the sensors, see
chapter 8.3 "Safety-related maximum values".
When working on the transmitter (e.g. installation/removal,
maintenance work) take measures to prevent electrostatic discharge
from the terminals.
Recommended tools for terminal screws:
Pozidriv screw-driver size 2 (ISO 8764).
max. tightening torque 0.4 Nm
WIKA operating instructions temperature transmitter, model T24
Input 4 ... 20 mA - loop
GB
15