Cramer 82LM46S Bedienungsanleitung Seite 4

•
Use extreme caution when reversing or
pulling the machine towards you.
•
Stop the blade(s) if the machine has
to be tilted for transportation when
crossing surfaces other than grass, and
when transporting the machine to and
from the area to be used.
•
Never operate the machine with
defective guards or shields, or without
safety devices, for example deflectors
and/or grass collector, in place.
•
Switch on the motor carefully according
to instructions and with feet well away
from the blade(s).
•
Do not tilt the machine when switching
on the motor, except if the machine
has to be tilted for starting. In this
case, do not tilt it more than absolutely
necessary and lift only the part, which is
away from the operator.
•
Do not start the machine when standing
in front of the discharge opening.
•
Do not put hands or feet near or
under rotating parts. Keep clear of the
discharge opening at all times.
•
Do not transport the machine while the
power source is running.
•
Stop the machine, remove the disabling
device and battery pack. Make sure
that all moving parts have come to a
complete stop
- whenever you leave the machine,
- before clearing blockages or
unclogging chute,
- before checking, cleaning or working
on the machine;
- after striking a foreign object. Inspect
the machine for damage and make
repairs before restarting and operating
the machine;
•
If the machine starts to vibrate
abnormally (check immediately),
- inspect for damage;
- replace or repair any damaged parts;
- check for and tighten any loose parts
EN
3
cramer.eu