General Maintenance - Cramer 82LM46S Bedienungsanleitung

Maintenance
EN
WARNING!
Before performing any maintenance, make sure the mower battery
and battery key are removed to avoid accidental starting and
possible serious personal injury.
WARNING!
To prevent accidental start-up or unauthorized use, the cordless
lawn mower is equipped with a removable safety key. To
completely disable the mower, the safety key should be removed
and kept in a place away from the mower and out of the reach of
children.
WARNING!
When servicing, use only authorised replacement parts. Use of
any other parts may create a hazard or cause product damage.
WARNING!
Keep the motor and battery compartments free from grass, leaves
or excessive grease. This will help reduce the risk of fire.

General Maintenance

Before each use, inspect the entire product for damaged, missing, or loose parts
such as screws, nuts, bolts, caps, etc.
Tighten securely all fasteners and caps and do not operate this product until all
missing or damaged parts are replaced. Please call Cramer customer service for
assistance. Avoid using solvents when cleaning plastic parts. Most plastics are
susceptible to damage from various types of commercial solvents and may be
damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc.
10
cramer.eu
WARNING!
To reduce the risk of damage and danger, never clean the tool
with pressure washer or under running water.
WARNING!
Store indoors only. Always remove the battery from mower and
charger when cleaning or storing the tool.
WARNING!
Do not at any time let brake fluids, gasoline, petroleumbased
products, penetrating oils, etc., come in contact with plastic parts.
Chemicals can damage, weaken, or destroy plastic which may
result in serious personal injury.
Periodically check all nuts and bolts for proper tightness to ensure safe operation
of the mower.
Wipe the mower clean with a dry cloth occasionally. Do not use water.
Lubrication
All of the bearings in this product are lubricated with a sufficient amount of
high grade lubricant for the life of the unit under normal operating conditions.
Therefore, no further bearing lubrication is required.
WARNING!
Always protect hands by wearing heavy gloves and/or wrapping
the cutting edges of the blade with rags and other material when
performing blade maintenance. Contact with the blade could
result in serious personal injury.