Components Of The Omnicam; Removing The Mirror Sleeve; Refitting The Mirror Sleeve - Dentsply Sirona CEREC Omnicam Anweisungen

Dentsply Sirona
Instructions for CEREC Bluecam and CEREC Omnicam
62 82 839 D3492
D3492.201.02.06.02 10.2018

Components of the Omnicam

2.2
A Press detent to release
B Mirror sleeve

Removing the mirror sleeve

2.3
If required to remove the mirror sleeve do the following:
1. Press the mirror sleeve against the camera body.
2. Press detent A.
NOTE
There is a risk of damaging the camera window or the coated
sapphire glass if the mirror sleeve is not pushed straight toward the
front.
➢ Push the mirror sleeve straight toward the front; do not tilt it.
3. Pull off the mirror sleeve.

Refitting the mirror sleeve

2.4
➢ Carefully refit the mirror sleeve until it locks in place.
NOTE
There is a risk of damaging the camera window or the coated
sapphire glass if the mirror sleeve is not pushed straight toward the
front.
➢ The mirror sleeve must not come into contact with the camera
window.
➢ Push the mirror sleeve straight toward the camera body; do not tilt
it.
➢ Carefully refit the mirror sleeve until it locks in place.
2 CEREC Omnicam
2.2 Components of the Omnicam
C Sapphire glass (coated)
D Camera window
5