Herunterladen Diese Seite drucken

Exp-1 Expression Pedal; Preset Settings - Fender MUSTANG GT40 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für MUSTANG GT40:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 198
The EXP-1 Expression Pedal is a dual-mode foot controller that enables the
user to control master volume ("Volume" mode) and various amp and effect
parameters ("Expression" mode).
Switch between Volume and Expression modes by stepping on the toe
switch (at the top of the pedal). Red and green LEDs indicate the mode in
use. Volume mode—indicated by the green LED—controls master volume
or can be turned off. Expression mode—indicated by the red LED—controls
many Mustang GT effect parameters such as wah effect frequencies, modu-
lation effect rates, etc.
To set up the EXP-1 for use, connect it to the footswitch jack on the back of the amplifier, turn the amp on.
Press the MENU utility button on the amp and use the ENCODER to scroll to and select "EXP-1 SETUP" on the
menu shown (see illustration below).
A prompt will appear to select "PRESET SETTINGS" or "GLOBAL SETTINGS" (see illustration below); use the
ENCODER to select one. PRESET SETTINGS is used to assign the EXP-1 to a specific amp or effect within a
particular preset, in which a wide variety of parameters can be modified, depending on the amp or preset in
use. GLOBAL SETTINGS is used to configure parameters that will affect all presets. Both are described in more
detail below.

PRESET SETTINGS

As noted above, PRESET SETTINGS is used to assign the EXP-1 to a specific amp or effect within a particular
preset. To do this, press the ENCODER on PRESET SETTINGS, and the middle SIGNAL PATH LAYER will show—
one at a time—the amp and effects in that preset to which the EXP-1 can be assigned. The user can scroll
through these by turning the ENCODER (see illustration below).
In EXP-1 PRESET SETTINGS, the amp and effects in a preset to which the EXP-1 can be assigned are shown one by one in the SIGNAL
PATH LAYER; the ENCODER is used to scroll through them. In the example above, a '65 Twin amp is highlighted.

EXP-1 EXPRESSION PEDAL

GLOBAL EQ
USER
EXP-1 SETUP
AMP SETTINGS
ABOUT THIS AMP
back
PRESET SETTINGS
GLOBAL SETTINGS
EXP-1 (PRESET)
back
'65
TWIN
VOL
OFF
GAIN
VOL
EXP
PARAM
HEEL
TOE
MENU
MENU
MENU
41

Quicklinks ausblenden:

Werbung

loading

Diese Anleitung auch für:

Mustang gt200Mustang gt100