Fender MUSTANG GT40 Bedienungsanleitung Seite 38

Use the ENCODER to scroll to and select a preset for the preset slot chosen in the preceding step.
MODE
Step on the footswitch MODE button (green arrow) to cycle through modes until red "QA MODE" MODE LED illuminates. The
three QUICK ACCESS presets are assigned to FUNCTION buttons 1, 2 and 3 (yellow arrows), each with its own red FUNCTION
LED to indicate use. The DISPLAY WINDOW also shows the QUICK ACCESS preset in use (preset 1 in this illustration).
PRESETS MODE
PRESETS mode enables the user to reach any of Mustang GT's many presets using the MGT-4 Footswitch. To
do this, step on the MODE button until "PRESETS" mode is activated, as indicated by the illuminated red MODE
LED directly to the left of the label "PRESETS. "
When the MGT-4 Footswitch is in PRESETS mode, presets become available in sequential groups of three
called "banks, " with each of the three presets in a bank assigned to FUNCTION buttons 1, 2 and 3. To move "up-
ward" through subsequent banks of three presets, step on FUNCTION buttons 2 and 3 simultaneously (these
are labeled on the footswitch as "BANK UP" for this purpose). To move "downward" through preceding banks
of three presets, step on the MODE button and FUNCTION button 1 simultaneously (these are labeled on the
footswitch as "BANK DOWN" for this purpose).
When the bank containing the desired preset is reached, select the desired preset within that bank by step-
ping on its corresponding FUNCTION button. When the desired preset has been selected, its corresponding
red FUNCTION LED will illuminate, and the DISPLAY WINDOW will show the preset in use (see illustrations on
following page).
Note that when activating PRESETS mode, the MGT-4 Footswitch will automatically set itself to whatever MUSTANG
GT preset is already set on the amp. This preset will be assigned to the footswitch FUNCTION button corre-
sponding to the preset's position within its bank (1, 2 or 3). For example, if the amp is set to preset number
33, the MGT-4 Footswitch in PRESETS mode will also be set to preset number 33 and will assign that preset to
FUNCTION button 3 (the third preset in the bank containing presets 31, 32 and 33).
99 - PRESET back
100 - PRESET
01 - PRESET
02 - PRESET
03 - PRESET
QA
BANK DOWN
PRESETS 1
EFFECTS FX 1
LOOPER REC/DUB
MENU
BANK UP
2
FX 2
MGT-4 PLAY/STOP
36
ASSY. P/N 7710238000
HOLD
TUNER
3
FX 3
UNDO