Safety Instructions - Lunos Silvento ec Einbauanleitung

Installation manual
Contents:
About this manual, Safety instructions, Disposal
Technical specifications, Shipping unit
Dimension diagram, Assembly: Control board in the grille frame
Installation examples
Assembly
Setting of the DIP switches
Attaching modules to the control board
Electrical connection, Connection diagrams
Humidity Control
Filter replacement, Positioning of the motion detector
Cleaning, Additional parts / Replacement parts
About this manual
 Read this manual carefully and completely before assembly! Always observe the general safety instructions and the
safety symbols with information in the text.
 Hand out this manual to the user (tenants, proprietors, property management etc.) after completing assembly.
 Symbols in this manual:
This sign warns you against risks of injury
This sign warns you against risks of injury from electricity

Safety instructions

Caution! Any assembly work to the ventilation device may only be carried out after disconnecting the
supply voltage! The ventilation device is fitted with protective insulation according to Protection Class II; a protec-
tive conductor connection is not required!
Attention! The electric connection may only be made by authorised qualified personnel and according to
the applicable version of VDE 0100!
Attention! This device must not be operated by children and persons (filter replacement/cleaning) who
are not able to operate the device safely due to their physical, sensory or mental abilities or their inexperience or
lack of knowledge.
Fans for exhaust air operation must at any time be provided with a continued flow of outside air.
Ventilator
Area 1
Area 2
Disposal
The packaging must be sorted before disposal. If you wish to dispose of the ventilation device, observe the
currently applicable regulations. Pursuant to the German Electrical and Electronic Equipment Act (ElektroG)
this device can be returned to your municipal collection point free of charge.
16
The German VDE
100 regulation per-
mits installation in
bath and shower
2,25 m room area 1.
EN
Page:
16
17
18
19
20
24
25
26
27
28
28
Fans must not be
installed for usage
as extractor hood.