Transport, Storage, Maintenance And Disposal - Siko MA503/1 Originalmontageanleitung

MA503/1

Transport, Storage, Maintenance and Disposal

Operating modes
There are two operating modes accessible via the keyboard:
1. Programming mode: One-time adjustment of the display to the appli-
2. Input mode: Functions required during normal operation.
7 Transport, Storage, Maintenance and Disposal
Transport and storage
Handle, transport and store electronic display with care. Pay attention to
the following points:
• Transport and / or store electronic display in the unopened original
• Protect the electronic display from harmful physical influences includ-
• Do not damage connections through mechanical or thermal impact.
• Prior to installation inspect the electronic display for transport dam-
Maintenance
With correct installation according to chapter
requires no maintenance except for battery change acc. to chapter
time to time. Clean the surface of the magnetic tape with soft cloth from
time to time if it is very dirty.
Disposal
The electronic display electronic components contain materials that are
harmful for the environment and are carriers of recyclable materials at the
same time. Therefore, the electronic display must be recycled after it has
been taken out of operation ultimately. Observe the environment protec-
tion guidelines of your country.
Battery: Do no throw batteries in the normal waste, into fire or water. Col-
lect batteries and dispose of them in an environmentally friendly way.
Only for EU countries: Defective or used batteries must be recycled accord-
ing to Directive 91/157/EEC.
MA503/1 · Date 05.09.2016 · Art. No. 80844 · Mod. status 151/16
cation.
packaging.
ing dust, heat and humidity.
ages. Do not install damaged electronic display.
English
4
the electronic display
5
29
from