Trouble Shooting; Transport, Storage, Maintenance And Disposal - Siko MA50 Originalmontageanleitung

MA50

Trouble Shooting

10 Trouble Shooting
Error states are recognized and shown in the display:
Message
Error
Decimal point
is blinking

11 Transport, Storage, Maintenance and Disposal

Transport and storage
Handle, transport and store electronic display with care. Pay attention to
the following points:
• Transport and / or store electronic display in the unopened original
• Protect electronic display from harmful physical influences including
• Do not damage connections through mechanical or thermal impact.
• Prior to installation inspect the electronic display for transport dam-
Maintenance
With correct installation according to chapter
requires no maintenance.
Disposal
The magnetic display electronic components contain materials that are
harmful for the environment and are carriers of recyclable materials at the
same time. Therefore, the electronic display must be recycled after it has
been taken out of operation ultimately. Observe the environment protec-
tion guidelines of your country.
MA50 · Date 15.10.2018 · Art. No. 80955 · Mod. status 324/18
Description
Signal current of
encoder in the "4 ...
20" operating mode is
below 3 mA.
Device cannot be cali-
brated to the set upper
or lower alignment
value any more.
Display does not show
the desired values.
packaging.
dust, heat and humidity.
ages. Do not install damaged electronic display.
Action
Check line between encoder and
measurement display for inter-
ruptions.
Check signal encoder.
Device is in the incremental
mode. Actuate the
enforce return of the display to
the absolute measure.
Align display (see chapter 7.1).
4
the electronic display
English 27
key to