Mounting The Oven Door; Cleaning The Glass Panels Of The Oven Door - Franke Frames by FS 982 M Bedienungsanleitung

EN
Pull the door
X X
outwards.

Mounting the oven door

After cleaning, the oven door has to be mounted
again.
Slide the hinges into their grooves.
X X
Turn the two block hooks (used as hinge
X X
attachments) upwards.
CAUTION! Damage to the oven due to wrong
handling!
Never try closing the door when one or both
Z X
blocks are partially or completely open.
Close the oven door.
X X

Cleaning the glass panels of the oven door

The oven door and the glass panels can be removed
to enable thorough cleaning of the glass panel.
The oven door has 3 glass panels:
– internal glass panel (near the cavity)
– intermediate glass panel (inside the oven door)
– external glass panel
The internal glass panel and the intermediate glass
panel can be removed for cleaning purposes.
The inside of the external glass panel can be cleaned
when the internal and the intermediate glass panel
are removed.
Removing and cleaning the internal glass panel
from the oven door
Ensure that the oven is cold before you start
Z X
cleaning.
Open the oven
X X
door completely.
FS 982 M
Turn the two black blocks (with the word CLEAN,
X X
at the bottom of the door) for 180° so that they fit
into the seats in the oven structure.
– Make sure to turn the black blocks completely.
The blocks click into their position.
„ „
CAUTION! Damage to the oven due to wrong
handling!
If the blocks are not turned completely, removing
the glass panel will cause the oven door to close
immediately.
Never try closing the door when one or both
Z X
blocks have partially or completely freed the glass
panel.
Carefully push the
X X
internal glass panel
(1) towards the oven.
Then lift the internal
glass panel (2).
The two black
„ „
blocks will
prevent the
door from
closing.
Clean the internal glass panel.
X X
Removing and cleaning the intermediate glass
panel of the oven door
After removing the internal glass panel, the
intermediate glass panel can be removed.
Carefully lift the intermediate glass panel out of
X X
the rubbers on both sides.
Clean the intermediate glass panel.
X X
Removing and cleaning the upper trims for
glass panels
For more thorough cleaning, the upper trims on the
oven door can be removed. The upper trims are fixed
with two screws, one in the upper right, one in the
upper left corner on the inside of the oven door. It is
only possible, to remove the upper trims when the
internal glass is removed.
– 30 –
2
1