Programming - Olivetti NETTUN@7000int'l Anwenderhandbuch

8. PROGRAMMING

The cash register can be programmed from the Programming environment
accessible from the main Sales screen by selecting [Functions]> Other
Functions environment followed by the [Config] key.
To:
perform programming
confirm the setting made and pass to the next
parameter
skip programming and pass directly to the next
parameter
cancel the setting
exit from the programming environment without saving
the programming changes
confirm the settings made and return to the start of the
SET mode
cancel an error message
when programming a department field, skip to the next
department to program the same field
When programming sales prices, the decimal separator is inserted automatically
when you enter amounts consisting of whole figures.
On the other hand, the decimal separator must be entered manually for amounts with
decimal figures.
set the related parameter as
described in the following
pages.
press
X.
press
X.
press
Delete.
press .Exit. without
confirming with .X.
press .
Total .
press .Delete.
Press .Subtotal.
8-1