Restoring The User Configuration (Database) Of The Cash Register - Code 349 - Olivetti NETTUN@7000int'l Anwenderhandbuch

RESTORING THE USER CONFIGURATION (DATABASE) OF THE CASH
REGISTER – CODE 349
Option SET 349 restores the user configuration (DATABASE) of the cash register.
Preliminary Operations
Data archival on the USB pen performed using the option SET 348 saves the data in
a file "<cashregisterid>-database.tar" archived in the folder [crf7100\database].
To be able to restore the data again using the SET 349 command, you must rename
the file from "<cashregisterid>-database.tar" to database.tar using a PC.
Operating Procedure
1.
2.
3. .3. .4. .9. .X.
4.
5.
9-6
Insert the USB pen into the cash register.
If you try to restore the data without first inserting the pen,
Note:
an error is displayed: "STICK NOT INSERTED".
Note: Before proceeding, it may be necessary to print the
Management reports indicated by the cash register (ACTIVE
ACCOUNT). You will not be allowed to proceed with the restore
operation until you do so.
Select SET mode for the register.
On the display the warning appears:
"DESTRUCTIVE OPER. PROCEED?"
Press the X key to continue.
You are asked if you want to format or not:
"FORMAT? ENABLED: 1, DISABLED: 0.
If you choose 1, the data in the cash register is deleted, if you choose 0
the data is maintained.
At the end, a message is shown on the screen:
"346-READING DATA/WAIT" and reading of the data starts.
a. If the data on the pen is read successfully, the message is displayed:
"READ EXECUTED/REMOVE STICK"
b. If, however, errors have occurred during reading, the warning
appears "READ ERROR/REMOVE STICK".
Try repeating the procedure, making sure that the pen is
Note:
inserted correctly. If the error re-occurs, contact Technical
Services.
The procedure has completed. The register prints a ticket (ECR
CONFIGURATION) that shows the current configuration of the cash
register. The ticket is saved in the EJ.
Remove the pen. When the USB pen is removed, the machine
automatically enters SET mode.