Changing The Vacuum Filter; Check Oil Level For Brake System - Jungheinrich EFG 430 Betriebsanleitung

6.9

Changing the vacuum filter

The vacuum filter (10) for the steering
system is located in the hydraulic tank.
Remove hydraulic tank cover and screw
off vacuum filter.
6.10

Check oil level for brake system

M
The brake fluid tank can be seen from the right side when the steering column is tilted
back.
To refill or change the mineral oil the cover (8) must be removed.
M
Do not use conventional brake fluid, refill only with prescribed mineral oil!
–– Park and lock the truck (refer to chap-
ter E).
–– Remove cover (8) after loosening the
screws.
–– Visually check the oil level at the ex-
pansion tank (9) and refill transmis-
sion oil, if required (refer to section
5.1).
Z
The oil level must be visible between
markings “"Min”" and “"Max”".
M
Used consumption-type materials must
be disposed of in accordance with the
applicable environmental protection reg-
ulations.
9
8
10
F 11