Jungheinrich EFG 430 Betriebsanleitung Seite 47

2.3.1 Warning displays, buttons and switches
The following conditions are displayed or switched on:
Item Display / Function
33 Hourmeter –– Time Toggle Switch
–– Service hours during which truck key switch is ON
–– EFF service hours can be switched ON or OFF via a code.
–– Time display
34 Controller overtemperature
–– Lights up to indicate controller overtemperature
–– Performance is continually reduced in relation to the temperature
35 Pump motor, steering booster overtemperature
–– Monitors the temperature of the pump motor and the steering booster
–– Performance is reduced if the temperature is excessive
36 Drive motor overtemperature
–– Monitors the temperature of the drive motor
–– Performance is reduced if the temperature is excessive
37 Seat switch / belt lock control (o)
–– Seat switch not closed
–– Truck operational, but driver’'s seat not occupied
–– Truck operational, belt lock not closed
38 Parking brake applied
–– Truck operational, parking brake applied
Travel direction indicator o
39
–– For lighting with a flashing indicator system
40 Truck operational
–– Key switch ON
41 Service display / UVV display
–– Service interval exceeded (1000 service hours) or annual UVV test due
(flashing indicator).
42 Insufficient brake fluid
–– The brake fluid level can be checked through sensors on the brake fluid
reservoir.
43 WARNING
–– Lights up to indicate error
–– Flashes when battery capacity is less than 10%
44 Crawl speed switch
–– Travel speed max. 6 km/h (adjustable)
45 Program selector
–– Up and down keys
46 SET key
–– Selects special functions
47 Operating program display
–– Displays the selected travel program (1 to 5)
E 8