Replacing The Roller Assembly - Xerox DocuMate 3125 Benutzerhandbuch

® ®
Xerox DocuMate 3125
3. Close the scanner when you're finished.

Replacing the Roller Assembly

After extended use, the feed roller may wear out. It is a user-replaceable
part and can be reordered.
Frequent paper jams are a symptom of a worn roller assembly. A worn roller
can cause documents to feed in skewed at an angle, or multiple pages to
feed at the same time. A worn roller should be replaced to avoid damage to the scanner's
internal parts. Before replacing the roller you should clean it as excessive dust on the roller will
make it appear worn and smooth. You cannot properly diagnose a worn roller until you have
cleaned it.
1. Open the Automatic Document Feeder cover.
9-157
Maintenance
User's Guide