Scan From The One Touch Button Panel - Xerox DocuMate 3125 Benutzerhandbuch

Scanning and Configuring One Touch
If the OneTouch OmniPage Module is not installed, then the options for sending to word
processing applications such as Microsoft Word will not be available. The OneTouch OmniPage
module is installed automatically when you install Visioneer OneTouch from the installation
disc.
Note: The default page size in each configuration is based on your computer's Windows
Measurement system selection of U.S. (United States) or Metric units.
• If U.S. is the selected measurement, the default page size in each profile will be based on
the United States standard paper sizes such as 8.5 x 11 inches.
• If Metric is the selected measurement, the default page size in each profile is based on the
ISO 216 standard and the majority of the profiles will default to A4.

Scan from the One Touch Button Panel

Scanning from the button panel on your computer's screen works like pressing a button on the
scanner. The scanner scans the item, then sends the image to the Destination Application
indicated by the button's icon.
To scan from the One Touch Button panel:
1. Load the documents into the scanner.
2. Click on the One Touch icon in the Windows notification area (at the lower right corner of
the screen.)
3. The One Touch Button Panel opens.
4. Click the button you want to use to scan.
5. The scanner starts scanning and the image is sent to the selected destination for the
One Touch button you are using to scan.
User's Guide
One Touch Icon
® ®
Xerox DocuMate 3125
6-26