Paperport - Xerox DocuMate 3125 Benutzerhandbuch

® ®
Xerox DocuMate 3125
• Fit to page, reduce image if necessary—if the scanned image is too big to be printed or
faxed on a single page, the image will automatically be reduced to fit the page.
• Actual size, crop image if necessary—if the scanned image is too big to be printed or
faxed on a single page, the image will automatically be cropped around its edges to fit on
the page.
Center image on page—the image will be printed in the center of the page instead of at
•
the top left corner.
• Maintain aspect ratio—the aspect ratio is the length-to-width relationship of the image's
dimensions. Select this option so the image's relative proportions remain constant.
• AutoRotate image for best fit—if the image is a Landscape format and the device is
printing in the Portrait mode, or vice versa, rotate the image to fit on the page.
Collate copies—if you are printing more than one page, collate the copies. Enter the
•
number of copies in the Copies box.
• Advanced—click to see additional settings for the device. The dialog box that opens is
specific to the device. For example, if the device is your printer, the dialog box is your
printer's setup settings.
Note: When scanning to multiple printers and/or faxes, select the specific device, you want to
configure the Advanced features for, from the list before clicking on the Advanced... button.

PaperPort

In the One Touch Properties window, select PaperPort as the Destination Application for
scanning.
Supported file types—all image file formats are available when scanning to PaperPort. The
sPDF and nPDF text file formats are only available when the OmniPage software or One Touch
OmniPage module is installed. Please refer to
6-55
Scanning and Configuring One Touch
Text Formats on page 43.
User's Guide