Replacing The Roller Assembly - Xerox DocuMate 3220 Benutzerhandbuch

Replacing the Roller Assembly

After extended use, the feed roller may wear out. It is a user-replaceable part and
can be reordered.
Frequent paper jams are a symptom of a worn roller assembly. A worn roller can
cause documents to feed in skewed at an angle, or multiple pages to feed at the
same time. A worn roller should be replaced to avoid damage to the scanner's internal parts. Before
replacing the roller you should clean it as excessive dust on the roller will make it appear worn and
smooth. You cannot properly diagnose a worn roller until you have cleaned it.
1. Pull on the ADF cover to open the scanner.
2. The roller assembly fits in a channel in the ADF cover.
Xerox ® DocuMate ® 3220
User's Guide
193