Scanning From Twain - Xerox DocuMate 4760 Benutzerhandbuch

Scanning from TWAIN

This chapter includes:
• Accessing the TWAIN Interface
• Scanning with the TWAIN Interface
• The Options in the TWAIN Interface
You can scan from any TWAIN scanning application instead of scanning from the One Touch buttons on your
scanner or the One Touch button panel.
A Note About Your Scanner and the TWAIN standard: TWAIN is a widely recognized standard that computers
use to receive images from scanners, digital cameras, and other digital devices. The TWAIN scanning interface can
be accessed from any TWAIN scanning application you have installed on the computer. Applications such as
Nuance PaperPort and OmniPage, and many other applications, can use the TWAIN interface for scanning.
The TWAIN interface, described in this section, is the one provided with your scanner and you will see it when
scanning from PaperPort or OmniPage. Other TWAIN compliant scanning applications may also access this
interface. However, there are some applications that have their own TWAIN interface. If you are scanning from a
software application, and see the interface shown in this section, you can use these instructions to scan with the
TWAIN interface. If you do not see this TWAIN interface, please refer to your scanning application's user guide for
instructions.
Note: You can access the TWAIN interface when you're scanning from the One Touch software. If the One Touch
configuration you are using is set to Configure Before Scan, and the selected option is TWAIN, the TWAIN interface
opens right away when pressing the button on your scanner without opening any other TWAIN-compliant software
first.
on page 134
on page 135
on page 136
7
Xerox DocuMate 4760
User's Guide
133