B-4. Ethernet Interface Model - Star TSP700 serie Bedienungsanleitung

B-4. Ethernet Interface Model

ON
OFF
No. 1 2 3 4 5 6 7 8
DIP-SW1
Switch
1-1 Command emulation (Ster Line mode)
1-2 Should not be changed (Should be set to on)
1-3 Should not be changed (Should be set to on)
1-4 Sensor adjustment
1-5 Should not be changed (Should be set to on)
1-6 Should not be changed (Should be set to on)
1-7 Should not be changed (Should be set to on)
1-8 Should not be changed (Should be set to on)
The factory settings of DIP switch are all on.
Switch
2-1~2-4
The factory settings of DIP switch are all on.
(E type)
DIP-SW1
Function
DIP-SW 2
Function
Always ON
LED
DIP-switch 3
ON
OFF
No. 1 2 3 4
DIP-SW2
ON
Always ON
Invalid
ON
Should be set to on
– 99 –
OFF
Valid
OFF
LED
Push Switch
(E2 type)