B-4. Ethernet Interface Model - Star TSP1000 SERIES Bedienungsanleitung

B-4. Ethernet Interface Model

ON
OFF
No. 1 2 3 4 5 6 7 8
DIP-SW1
Switch
1-1 Command emulation
1-2 Command emulation
1-3 Should not be changed (Should be set to on)
1-4 Sensor adjustment
1-5 Should not be changed (Should be set to on)
1-6 Handshaking coditions
(conditions for BUSY)
1-7 Should not be changed (Should be set to on)
1-8 Should not be changed (Should be set to on)
The factory settings of DIP switch are all on.
Switch 1-1
ON
OFF
OFF
Switch
2-1~2-4
The factory settings of DIP switch are all on.
DIP-SW1
Function
Switch 1-2
ON
ON
OFF
DIP-SW 2
Function
Always ON
– 139 –
ON
OFF
No. 1 2 3 4
DIP-SW2
ON
See table below
Valid
Offline or receive
buffer full
Command emulation
Star Line Mode
Star Page Mode
ESC/POS Mode
ON
Should be set to on
OFF
Invalid
Receive buffer full
OFF