Operation - Klarstein 10028741 Anschluss- Und Anwendungshinweise

Usage:
1. Plug in the socket.
2. Switch on the machine; the background light of LED will be on. The machine begins to work.
3. Touch the symbol "MAX-MIN", you may adjust the mist volume. On the remote control, just press the
button of .
4. Touch the symbol
again to stop the function.
5. Touch the symbol
shape of fire. Touch again to stop the function. Mist will become cool.
6. Constant humidity: Before you touch the symbol
may set the humidity arranged from 45%RH to 90%RH. Press once, it will increase by 5%RH. When it
reaches 90%RH, press again, it will back to 45%RH. After you set the expected humidity, the machine
will keep the memory after 5 seconds. 5 seconds later, the LED display shows the current humidity. If
the expected humidity is less than the current humidity, the machine will be in sleeping state. But if the
expected humidity is higher than the current humidity, the humidify function will work.
7. Timer setting: The timer setting is from 1 to12 hours. Touch the symbol
timer. The timer shows the rest operation time and decrease by 1 hours, i.e., if set the timer at 12 hours,
LED display shows 11 after one hour. Once you have set the timer, the value of time remaining in timer
and the room temperature will display 30 seconds alternating in the middle of LED display.
8. Once the water in the basin is too little to keep the machine working, the machine will automatically
stop working. LED shows the symbol
maintenance).

Operation

, the ozone generator works. On the LED display, it shows the shape of trees. Touch
, the warm mist will come out after 10 minutes. On the LED display, it shows the
. Refill the water, and the machine will restart (see chapter on
, the LED display shows the current humidity. You
, the LED display shows the
14