Inhaltsverzeichnis
Werbung
REAR SHOCK ABSORBER COMPRESSION
DAMPING FORCE ADJUSTMENT (TT-R125LWE)
b
1
a
3-26
EC36c000
REAR SHOCK ABSORBER
COMPRESSION DAMPING FORCE
ADJUSTMENT (TT-R125LWE)
1. Adjust:
• Compression damping force
By turning the adjuster 1.
Stiffer a →
Increase the compression
damping force. (Turn the
adjuster 1 in.)
Softer b →
Decrease the compression
damping force. (Turn the
adjuster 1 out.)
Extent of adjustment:
Maximum
Fully turned in
position
• STANDARD POSITION:
This is the position which is back by the
specific number of clicks from the fully turned-
in position.
Standard position:
About 9 clicks out
NOTICE
Never go beyond the maximum or minimum
adjustment positions.
INSP
ADJ
Minimum
12 clicks out
(from maximum
position)
Werbung
Inhaltsverzeichnis
