Short Instructions - Hafele DTSH Montageanleitung

Short instructions

Allocate locking authorisations to user key
1 . Present green programming key to the control panel .
Blue LED flashes .

2 . Present user key that has to be trained to the control panel for 5 sec-
onds . The locking authorisations for the user key have been allocated
when the blue LED flashes briefly .
3 . Remove trained user key .
4 . Present the next user key to be trained to the control panel within
5 seconds .
Withdraw locking authorisations from user key
1 . Present red clearing key to the control panel .
Red LED flashes .

2 . Present user key that has to be cleared to the control panel . When
the red LED flashes briefly, the locking authorisations have been with-
drawn . The Dialock DTSH door terminal then goes into normal operat-
ing mode .
If no more keys are presented to the control panel the DTSH goes
into the normal operating mode.
Withdraw locking authorisations from all user keys
If a user key has been lost and you wish to cancel its locking authorisa-
tions, all user keys must first be deleted at the Dialock DTSH door termi-
nal . Access rights must then be re-allocated to all user keys with locking
authorisations .
1 . Present red clearing key to the control panel .
Red LED flashes .

2 . Present green programming key to the control panel .
 Red LED flashes briefly .
3 . Re-allocate access rights to all user keys that are still to have locking
authorisations .
Dialock Door Terminals DTSH, DTSH FH - Status: 07 .2008 - 732 .29 .134
Installation Instructions
65