Installation And Maintenance Instructions - English; Notes On These Installation And Maintenance Instructions; Contents And Target Group Of The Instructions; Obligations Of The Installer - Hafele DT 710 Montage- Und Wartungsanleitung

Installation and maintenance instructions - English

1. Notes on these installation and maintenance instructions

1.1 Contents and
target group of
the instructions
1.2 Obligations of
the installer
1.3 Obligations of
the operator

2. Safety

2.1 Safety notes and
symbols in these
installation and
maintenance in-
structions
It is essential to pay attention to these instructions in order to install the product
successfully and safely. Please pay attention to all of the specified installation steps,
instructions and notes!
These installation instructions are intended for:
• the operator of the product
• the installer of the product
As well as these installation instructions, both groups of people must also have read
the separate operating instructions before handling the product.
The installer has the following obligations:
• All notes and specifications in the installation instructions must be complied with.
The installation steps must not be deviated from or varied.
• Only the supplied original parts must be installed.
• The installation instructions must be handed to the operator
after installation has taken place.
The operator has the following obligations:
• The installation requirements must be adhered to.
• The product may only be installed and started up by qualified experts
(see Chapter "1.3 Personnel qualifications" in the operating instructions).
• The instructions must be kept until the product is disposed of, and handed to the
new operator in the event of a change of operator.
Safety notes
Safety notes in these installation and maintenance instructions follow a uniform
structure. They are introduced by a signal word that indicates the extent of the
hazard. This is followed by the source of the danger and measures to avoid them.
The following risk levels are distinguished:
DANGER
This combination of symbol and signal word indicates an immediately dan-
gerous situation causing death or serious injury if not avoided.
WARNING
This combination of symbol and signal word indicates a potentially danger-
ous situation that may cause death or serious injury if not avoided.
CAUTION
This combination of symbol and signal word indicates a potentially danger-
ous situation that may cause minor or light injury if not avoided.
NOTE
The note is used to point out dangerous situations which could lead to po-
tential property damage/consequential damage to the product or damage
to the environment.
Notes are also used to provide important additional information.
15