English
c) When battery pack is not in use, keep it away from other
metal objects, like paper clips, coins, keys, nails, screws
or other small objects that can make a connection from
one terminal to another. Shorting the battery terminals
together may cause burns or a fire.
d) Under abusive conditions, liquid may be ejected from the
battery; avoid contact. If contact accidentally occurs, flush
with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause
irritation or burns.
e) Do not use a battery pack or tool that is damaged or
modified. Damaged or modified batteries may exhibit
unpredictable behaviour resulting in fire, explosion or risk
of injury.
f) Do not expose a battery pack or tool to fire or excessive
temperature. Exposure to fire or temperature above
130 °C (265 °F) may cause explosion.
g) Follow all charging instructions and do not charge the
battery pack or tool outside the temperature range
specified in the instructions. Charging improperly or at
temperatures outside the specified range may damage the
battery and increase the risk of fire.
25.7 Service
a) Have your power tool serviced by a qualified repair person
using only identical replacement parts. This will ensure
that the safety of the power tool is maintained.
b) Never service damaged batteries. Service of battery
packs should only be performed by the manufacturer or
authorized service providers.
94
25 General Power Tool Safety Warnings
25.8 Chain saw safety warnings
– Keep all parts of the body away from the saw chain when
the chain saw is operating, make sure the saw chain is not
contacting anything. A moment of inattention while
operating chain saws may cause entanglement of your
clothing or body with the chain saw.
– Always hold the chain saw with your right hand on the rear
handle and your left hand on the front handle. Holding the
chain saw the other way round increases the risk of injury
and may not be used.
– Always hold your chain saw by the insulated handles
because the saw chain may contact hidden electrical
wires or your own power cord. Any saw chain contact with
a live wire may energize metallic parts of the power tool
and result in an electric shock.
– Wear eye protection. Further protective equipment for
hearing, head, hands, legs and feet is recommended.
Suitable protective clothing helps reduce the risk of injury
from thrown wood chips and accidental contact with the
saw chain.
– Never work with a chain saw in a tree, on a ladder, on a
roof or other instable surface. There is a risk of injury in
such situations.
– Always keep proper footing and operate the chain saw
only when standing on a fixed, secure and level surface.
A slippery surface or instable support such as a ladder
could cause the operator to lose control of the chain saw.
– When cutting a limb that is under tension be alert for
spring back. When the tension in the wood fibers is
released the spring loaded limb may strike the operator
and/or throw the chain saw out of control.
– Use extreme caution when cutting brush and saplings.
The slender material may catch the saw chain and be
whipped toward you or pull you off balance.
– Carry the chain saw by the front handle with the chain saw
switched off and the saw chain away from your body.
When transporting or storing the chain saw always fit the
guide bar scabbard. Proper handling of the chain saw will
reduce the likelihood of accidental contact with the moving
saw chain.
0458-716-9621-C