Disengaging The Chain Brake; Removing And Fitting The Battery; Fitting The Battery; Removing The Battery - Stihl MSA 120 C Gebrauchsanleitung

9 Removing and Fitting the Battery

► Push the hand guard away from the handlebar with your
left hand.
The hand guard engages with an audible click. The chain
brake is engaged.
8.2

Disengaging the Chain Brake

► Pull the hand guard toward the handlebar with your left
hand.
The hand guard engages with an audible click. The chain
brake is disengaged.
9 Removing and Fitting the Battery
9.1

Fitting the Battery

► Engage the chain brake.
1
2
0458-716-9621-C
3
► Insert the battery (1) in the battery compartment (2) and
press it home until you hear a click.
Arrows (3) on battery (1) are still visible and battery (1) is
held securely in battery compartment (2). There is no
electrical contact between the saw and battery (1).
► Push the battery (1) into the battery compartment (2) as
far as stop.
The battery (1) engages with a second click and is flush
with the saw's housing.
9.2

Removing the battery

► Stand the saw on a level surface.
► Press the locking lever (1).
The battery (2) is unlocked and can be removed.

10 Switching the Saw On/Off

10.1 Switching On

► Disengage the chain brake.
English
2
1
73