Herunterladen Inhalt Inhalt Diese Seite drucken

The Safe2Go Car Seat - Mutsy Slider Gebrauchsanweisung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 18
English
to transport children when they are
lying down. You can remove the carry
cot from the pushchair with the push
bar. You can carry the carry cot by the
push bar of the top frame.
! When carrying the carry cot by the
push bar ensure that you do not acci-
dentally operate the height adjustment
button of the push bar.
Fitting the carry cot (s)
The seat upholstery must first be
removed from the top frame in order to
fasten the carry cot to the top frame,
see: "Remo-ving the pushchair uphol-
stery (t)".
· Adjust the push bar to the vertical posi-
tion and place the carry cot on the top
frame. Place the foot end of the carry
cot on the foot end of the framework.
The foot end is the narrower end. This
side of the top frame is indicated with
the marking 'FEET'.
· Pull the fabric on the underside of the
carry cot around the head and foot end
and close the zips on the underside in
order to fasten the carry cot.
Removing the carry cot (s)
· Unzip the zips on the underside of the
carry cot. You can now remove the carry
cot.
Placing the carry cot on the sub-frame
See:" Placing the pushchair seat on the
sub-frame (i + j)"
Removing the carry cot
See:"Removing the pushchair seat
from the sub-frame (i + j)"
The canopy
· Put the canopy up by moving the front
wire forwards until it clicks into place
on both sides.
· Fold the canopy down by pressing the
pushbuttons on both sides and then
moving the canopy backwards.
The carry cot apron
· Place the apron over the carry cot and
fasten it with the velcro strips and
press-studs on both sides of the cover.
· To remove the apron, unfasten the
26
press-studs and velcro strips on either
side.
Making the carry cot compact (u)
· To make the carry cot compact fold the
canopy down and adjust the push bar
to the angled position at the head end
of the carry cot.
· The carry cot can be folded compactly
by first removing the liner and then
folding the three metal U-shaped wires
to the inside.
The Safe2go car seat
The Safe2go car seat is suitable for chil-
dren from birth up to 13 kg. First take
the carry cot off the top frame before
using the Safe2go car seat. You do not
need to unzip the carry cot to do this.
Removing the carry cot from the top
frame (n)
· Unfasten the head end by pressing
the buttons on the underside of the
carry cot and moving the carry cot
upwards.
· Do the same at the foot end. You can
now lift the carry cot off the top frame
and carry it by the carry-ing handles
inside the carry cot.
Placing the Safe2go adaptors (o)
The markings 'FEET' on the Safe2go
adaptors indicate the foot end of the
adaptors.
· Position the adaptors in such a way
that the markings 'FEET' on the adap-
tors correspond to the 'FEET' markings
on the top frame.
· Place the adaptors by sliding them for-
ward over the notches (o1)
· Press the back down until it clicks into
place (o2). The adaptors are securely
locked when the red indicators on the
inside are no longer visible in the aper-
tures.
! Ensure that the adaptors are securely
locked before each use.
Placing the Safe2go
This is a short description for the place-
ment of the Safe2go. For the complete
instructions we refer to the Safe2go
user manual.

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis