Maxi-Cosi Car Seat P; Grago Snugride Car Seat P; Graco Safeseat Car Seat P; Peg-Pérego Primo Viaggio Sip Carseat P - Mutsy Transporter Gebrauchsanweisung

English
placing a child in the stroller seat.
· Use the brake to park the stroller be-
fore placing the child in the seat.
· Attach the hip and shoulder straps to
the strap running between the legs. (V)
· Adjust the straps to fit using the
b uckles. (W)
· Loosen the harness by pressing the
teeth of the central buckle. (X)
· Check regularly to see that the child is
still secure.
· D-rings are provided to allow an ad-
ditional strap to be attached.
Maxi-cosi 0-9 months car seat (option)
installing the Maxi-cosi
· Slide the adapter set over the central
attachment points. (Y1)
! Attach the adapter marked R on the
right and the adapter marked L on the
left of the frame.
· Locate the Maxi-Cosi on the adapters
so that the child is able to look round.
When the Maxi-Cosi is properly s ecured
you will hear a click. Check that the
Maxi-Cosi is secure by testing if you
can lift it from the frame.
removing the Maxi-cosi
· Press in the buttons on the side of the
Maxi-Cosi and lift it from the adapters.
· If you also wish to remove the adapt-
er set from the frame, press on the
li p s below the attachment points and
then slide the adapters up at an an-
gle. (L)
! Replace the central attachment point
cover caps. (M)
graco snugride 2.3–10 kg (5-22 lbs) car
seat (option) / graco safeseat 2.3–13.5
kg (5-30 lbs) car seat (option)
installing the car seat adapter
· Place the seat in the fully reclined po-
sition. (Y2-1) On each side of the seat
14
first detach the indicated popper (Y2-
2) and then the indicated hook from
the frame. (Y2-3)
· Slide the fixing of the adapter over the
two fixation points provided for this
purpose. (Y3)
! You will hear a click when the Graco
car seat adapter is properly secured.
Check that the adapter is secure
by testing if you can slide it off the
frame.
installing the graco car seat
· Attach the Graco car seat to the adap-
ter so that the child is facing towards
you.
! You will hear a click when the Graco car
seat is properly secured. Check that the
Graco car seat is secure by testing if
you can lift it from the adapter.
removing the graco car seat
· Pull the release lever located below the
head end and lift the Graco car seat to
release it from the adapter.
removing the graco car seat adapter
· Slide the unlock button upward at an
angle (Y4-1), then slide the adapter
backward at an angle. (Y4-2)
· On each side of the seat first attach
the hook and then popper to the
frame.
Peg-Pérego Primo Viaggio siP 5-30 lbs
(2.3-13.5 kg) car seat (option)
installing the Peg-Pérego car seat adapter
· Place the seat in the fully reclined po-
sition. (Y2-1) On each side of the seat
first detach the indicated popper (Y2-
2) and then the indicated hook from
the frame. (Y2-3)
· Slide the fixing of the adapter over the
two fixation points provided for this
p urpose. (Y5)
! You will hear a click when the Peg-