Camera Settings Page - Videotec NXPTZT Bedienungsanleitung

9.3.13 Camera Settings page

The camera integrated in the device can be
configured under the Camera Parameters menu:
• Digital Zoom: It allows enabling or disabling the
digital zoom. (in addition to the optical).
• Focus: It allows setting the focus in automatic or
manual mode.
• Exposure: It allows setting the exposure (Mode)
as automatic or manual (Speed, Opening
or Brightness priority). You can improve the
visibility (High sensitivity) and contrast (Backlight
compensation). It allows enabling the automatic
slow-down of the shutter (Auto slowshutter)
according to the brightness, setting a limit to
the gain of the sensor (Gain limit) and setting a
value of the brightness compensation (Exposure
compensation).
• Infrared: It allows manually or automatically
checking the IR filter.
• White Balance: It allows configuring the white
balance in automatic or manual.
• Wide Dynamic Range: This is to enable and
configure the function to improve the contrast
between the luminous zones and the shadow
zones. It enables the Wide Dynamic Range function
(including the Visibility Enhancer) and configures
the Light intensity, Light Compensation and Light
Compensation Intensity settings.
62
• Other: It allows setting other values: Image Mirror,
Noise Reduction, High Resolution, Aperture
Control, Defog Mode, Ceiling Mount, Highlight
Correction (and relative masking level).
Fig. 122
MNVCNXPTZT_1710_EN