Herunterladen Inhalt Inhalt Diese Seite drucken

Housing Board Description; Connection Of The Camera And Motorised Lens - Videotec ULISSE MAXI NETCAM Bedienungsanleitung

Full ip ptz einheit fuer netzwerk-kameras fuer die dynamische ueberwachung grosser aussenbereiche
Vorschau ausblenden Andere Handbücher für ULISSE MAXI NETCAM:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 195

7.3 Housing board description

BOARD DESCRIPTION
Connector/Terminal
Function
CN1
Not used
CN2
Motorised lens motor control
connector
CN3
Motorised lens potentiometer
connector
CN6
Not used
CN7
Camera power supply, additional lines
DIP1
Select the lens power supply voltage
Tab. 1
CN3
CN2
CN1
DIP1
Fig. 15
MNVCUPTMAXIR_1625_EN
7.3.1 Connection of the camera and
motorised lens
All connections illustrated below should
be made only and exclusively by expert
installers who should comply with all the
wiring and power supply specifications for
the devices.
The electronics board is designed to control cameras
with motorised lenses, which may or may not have
potentiometers to control the position reached.
Before making the connections make sure
that the voltages supplied by the board fall
within the limits allowed for the apparatus.
CONNECTOR FOR CAMERA/MOTORISED LENSES
Voltage
+12V
+5V
CN6
From 6Vdc up to
15Vdc (adjustable)
CN7
Tab. 2
To power the camera perform the connections as
shown in figure.
+12V GND
Fig. 16
CN7.
Current
Description
800mA max
Camera power
supply
15mA max
Lens potentiometer
power supply
200mA max (Focus
Lens motor power
+ Zoom + Iris)
supply
+12V
GND
A
B
F1
F2
17

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis