Herunterladen Inhalt Inhalt Diese Seite drucken

Overvoltage; The Read Out And Management Programme Rodata 2.0; Maintenance; Accessories - Rothenberger ROFUSE 400 TURBO Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für ROFUSE 400 TURBO:
Inhaltsverzeichnis

Werbung

Fitting Shortcircuit Detected
A short circuit was detected on the fitting. Please check the contacts of the fitting and plug for
damage or dirt.
Fitting diameter > 400 mm
The ROFUSE 400 Turbo can only weld fittings of up to 400 mm in diameter.
Dataloss at Start - Memory Full!!
If a welding sequence is started despite this message data loss will occur. The welding is NOT
documented. Back up all data using a USB stick and erase ALL logs.
An impermissible ambient temperature
The ambient temperature is outside the permissible range. Place the device in the shadow or
switch on the heater.
Undervoltage
Turn up the voltage during generator operation.

Overvoltage

Turn down the voltage during generator operation.
Frequency error
The frequency of the supply voltage is outside the permissible range.
A system error
Send in the device immediately for repair. Do not perform any more welding!
Interruption
Interruption of the welding voltage occurred during welding.
The welding voltage is faulty
The welding voltage moved outside the permissible range during welding.
9

The read out and management programme RODATA 2.0

The read out software as well as the installation and operating manual for the software can be
found on the USB stick supplied. The software can also be downloaded if necessary from the
homepage www.rothenberger.com.
10

Maintenance

According to DVS 2208 Part 1, repeat checking (maintenance) should be undertaken at least
once a year.
11

Accessories

Accessory Name
Barcode scanner
Plug 4.0 mm
Plug 4.7 mm
12

Customer service

The ROTHENBERGER service locations are available to help you (see listing in catalog or on-
line) and replacement parts and service are also available through these same service locations.
Order your accessories and spare parts from your specialist retailer or using our service-after-
sales hotline:
Phone:
+ 49 (0) 61 95 / 800 – 8200
Fax:
+ 49 (0) 61 95 / 800 – 7491
Email:
service@rothenberger.com
www.rothenberger.com
30
ROTHENBERGER Part Number
1500001316
1500001317
1500001318
ENGLISH

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Rofuse 1200 turbo

Inhaltsverzeichnis