Analysis On A Pc Of Charging/Discharging - VOLTCRAFT VC-1506 Bedienungsanleitung

18. analysIs on a pC of ChargIng/dIsChargIng

For ambitious users, the Voltcraft VC-1506 battery charger makes it possible to show and store the development of
individual parameters on a PC during charging and discharging.
• Put the enclosed CD into the drive of the computer.
• Install the USB driver usb-drv (install.exe).
• Install e-station (setup.exe).
• Follow the respective instructions by the installation wizard.
• Switch on the battery charger and select the settings you want as well as the program desired.
- +
• Connect the battery charger to the PC connecting via the USB port.
• Connect the battery to the battery charger.
• Start the application e-station.exe by double-clicking on the icon.
• Start the program desired for the battery charger.
• In a few seconds the screen will display the battery type connected, the charging/discharging program selected,
the settings selected in „User Set" as well as the source voltage (1).
• You can then display various diagrams in the diagram.
• Clicking on the first symbol (2) in the left column shows the development of the battery voltage (V) and of the
charging/discharging current (mA) over the time axis (min).
Make sure you have selected USB Enable in the basic settings.
103