If the elevator reacts opposite to the description above, you can switch the direction of the elevator servo
with the reverse switch (see figure 2, item 8). For further information about this issue, refer to the following
section „Reverse Function".
Aileron function
If the control stick for the elevator and aileron functions (see figure 2, item 3) is moved to the left, the left aileron must
deflect to the top and the right aileron to the bottom (see figure 18). In flight, this pushes down the left half of the wing
and lifts up the right half.
The model turns to the left around its longitudinal axis. You have to slightly pull on the elevator control so that the
model does not loose any height in this slanted position.
If the control stick for the elevator and aileron functions (see figure 2, item 3) is moved to the right, the left aileron must
deflect to the top and the right aileron to the top (see figure 19). In flight, this lifts up the left half of the wing and pushes
down the right half.
The model turns to the right around its longitudinal axis. You have to slightly pull on the elevator control so that the
model does not loose any height in this slanted position.
If the aileron reacts opposite to the description above, you can switch the direction of the aileron servo with
the reverse switch (see figure 2, item 8). For further information about this issue, refer to the following
section „Reverse Function".
54
Figure 18
Figure 19