Reely SKY R222 Bedienungsanleitung Seite 67

Push the pitch lever carefully forward and check if the adjustment was sufficient. Keep repeating this procedure until
the helicopter no longer has any tendency to turn to the right.
If the tip of the fuselage turns to the left, carry out a right trim adjustment.
If the helicopter wants to drift or tilt to the right (see figure 20), reduce the speed and push the trim button for the roll
function (see figure 1, item 5) gradually to the left.
Every activation of a button is confirmed by a short audio signal. The percentage shown in the right half of
the display also changes, and the bar display for the roll trimming slowly moves to the left or the right.
When resetting, the centre trimming position (50%) is indicated with a deeper humming sound.
Push the pitch lever carefully forward and check if the adjustment was sufficient. Repeat the procedure until the model
does not show any tendency to drift to the right.
If the helicopter wants to drift sideways to the left, carry out a trim adjustment to the right.
Figure 19
Figure 20
67